Next step

The bodywork for the rear of the car is nearly complete. Fitting the exhaust panel to the car will require a bit of work to the rear of the car, but other than that this is ready for primer and the long process of block sanding.

After working with the huge amount of filler in the left rear quarter panel, it became clear that the best solution was to remove it and rework the panel with less filler.

The area that was repaired was easily feathered into the rest of the panel everywhere but in the wheel opening. After a bit of work, this came around and should be pretty close. We'll know when it gets under primer and the block sanding begins.